And some tricks for cleaning you will figure out.For example cleaning the nozzle without heating makes no sense… etc. The most important things for 3D Printing are a good contact spray for the bed, some experience with temperatures (nozzle and bed) needed for the filament ( it is mostly about 205 for nozzle and 40-60 for the bed)(☌). …And you can setup a new print really fast. Ive been doing a lot of 3D printing lately and thought it would be helpful to share how I set Blender up. To level the bed manually needs the same time as you have to do on an automatic device. If your primary purpose for using Blender is for 3D printing, you may want to save this as part of your default configuration ( Shift + U or File Save Startup File ). You do not need extra special sensors an mechanics. Needs some time but then the results are really good and constant. Find a Picture or Similar Object for Reference 4.
Prepare the Workspace for Modelling for 3D Printing 3. Also know or learn how to clean mechanical parts like the nozzle and the bed and know where problems can be. How to Use Blender to Prepare/Create STL Files & 3D Printing (Sculpting) 1. Don’t just take the nice printed model of the Table and print again.
The only thing you have to know about 3D printing is that you have to prepare your printer as good as you can before every new print… It is all the same with all (expensive and “cheap” printers) One thing is that you have to clean and prepare everything before you start a new print.
_w0NnoGB.jpg "setup blender for 3d printing")
Sorry for advertising … it is just my advice to start with good and pro 3D printing and going further.
0 kommentar(er)
